• Search Engineering
  • Search University of Warwick
  • Search for people at Warwick
  • Search Student Blogs
  • Search Warwick Blogs
  • Search past exam papers
  • Search video
logo
   Computational Science and Engineering Laboratory
"To address critical material
needs through innovative computational 
research, education & outreach"
Doctoral & MS dissertations supervised Archival Journal Publications Lectures & Colloquia Books Edited Refereed Conference Publications Other Conference Presentations Technical Reports
Positions Available Suggested Curriculum for Doctoral Studies
    

Other Conference Presentations

Note: All papers are copyrighted by either a publisher or the MPDC group. All rights of reproduction or distribution in any form are reserved. The journal papers are also available for download at the web sites of the publishers.

Instructions: Click on the underlined words or paper numbers to download or view in Adobe PDF format a thesis, paper, presentation, or report.



OTHER CONFERENCE PRESENTATIONS

[ 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988, 1986 ]

2012


[131] Nicholas Zabaras and Ilias Bilionis, "Mumti-output Local Gaussian Process Regression: Applications to Uncertainty Quantification", keynote lecture at the "Uncertainty quantification in computational mechanics and engineering sciences" symposium (W.K. Liu; C. Soize, organizers) at the ECCOMAS 2012, 6th European Congress on Computational Methods in Applied Sciences and Engineering , Vienna, Austria, September 10-14, 2012 (Powerpoint Presentation).

[130] Nicholas Zabaras and Bin Wen, "Model Reduction and Reconstruction of Realistic Microstructures for Computing Property Variability", presented at the International Conference on 3D Materials Science, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, July 8-12, 2012 (Powerpoint Presentation).

[129] Bin Wen and Nicholas Zabaras, "Computing fatigue properties of polycrystalline Ni-based superalloy microstructures using an image-based computational approach", presented at the International Conference on 3D Materials Science, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, July 8-12, 2012 (Powerpoint Presentation).

[128] Jiang Wan and Nicholas Zabaras, "A New Approach for Solving Multiscale SPDEs based on Multiscale Basis Functions and Graphical Model Learning", presented at the symposium "Predictive Fidelity in Multiscale Simulations - Part III of III" (Ernesto E. Prudencio, Gabriel Terejanu, organizers, at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

[127] Nicholas Zabaras and Ilias Bilionis, "Coarse Graining with Uncertainty: A Relative Entropy Framework", presented at the symposium "Predictive Fidelity in Multiscale Simulations - Part II of III" (Bert J. Debusschere Habib N. Najm and Allen C. Robinson, organizers), at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

[126] Peng Chen and Nicholas Zabaras, "Optimization methods for stochastic inverse problems - Part I of II", presented at the symposium "Optimization methods for stochastic inverse problems - Part I of II" (Clayton G. Webster Max Gunzburger and Hyung-Chun Lee, organizers), at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

[125] Ilias Bilionis and Nicholas Zabaras, "Hierarchical multi-output Gaussian process regression for uncertainty quantification with arbitrary input probability distributions", presented at the symposium "Minisymposium: Stochastic Uncertainty: Modeling, Forward Propagation, and Inverse Problems - Part V of V" (Youssef M. Marzouk, Olivier LeMaitre and Fabio Nobile, organizers), at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

[124] Ilias Bilionis and Nicholas Zabaras, "Uncertainty Quantification with High Dimensional, Experimentally Measured Inputs", presented at the symposium "Numerical Methods for High-Dimensional Uncertainty Quantification - Part V of V" (Dongbin Xiu and Alireza Doostan, organizers), at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

[123] Nicholas Zabaras and Ilias Bilionis, "Sparse Bayesian Techniques for Surrogate Creation and Uncertainty Quantification", presented at the symposium "Minisymposium: UQ for Model Calibration, Validation and Predictions - Part I of II" (Ernesto E. Prudencio, Gabriel Terejanu, organizers, at the SIAM Conference on Uncertainty Quantification, Raleigh, NC, April 2-5, 2012 (Powerpoint Presentation).

2011


[122] Ilias Bilionis and Nicholas Zabaras, "Multi-output Local Gaussian Process Regression: Applications to Uncertainty Quantification", presented at the USA/Brazil Symposium on Stochastic Modeling and Uncertainty Quantification, Rio de Janeiro, Brazil, August 1-5, 2011 (Powerpoint Presentation).

[121] Bingxin Xu, Nicholas Zabaras, "Non-Linear Principal Component Analysis for Two-Phase Microstructure Model Reduction", presented at the `Image-Based and Statistics-Based Computational Modeling of Materials' symposium (Andrew B Geltmacher, Surya Kalidindi, Siddiq M Qidwai, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[120] Peng Chen, Nicholas Zabaras, " Exploring Position Dependent Property/Microstructure Relationships in Polycrystal Materials via Probabilistic Graphical Model Techniques", presented at the `Image-Based and Statistics-Based Computational Modeling of Materials' symposium (Andrew B Geltmacher, Surya Kalidindi, and Siddiq M Qidwai, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[119] Jiang Wan, Nicholas Zabaras, "Stochastic Input Model Generation with Bayesian Networks", presented at the `Uncertainty Quantification in Computational Science and Engineering' symposium (Roger Ghanem, Christian Soize, Gerhart Schueller, Wing Kam Liu, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[118] Jin Xu, Nicholas Zabaras and Guang Lin, "A Bayesian Implementation of Cluster Expansion in Multidimensional Discrete Wavelet Transform Representation", presented at the `Recent Developments In Nanoscale Modeling of Materials' symposium (Albert C. To, Sukky Jun and Shaofan Li, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[117] Bin Wen and Nicholas Zabaras, "Uncertainty Quantification in Multiscale Deformation Processes", presented at the `Uncertainty Quantification in Computational Science and Engineering' symposium (Roger Ghanem, Christian Soize, Gerhart Schueller, and Wing Kam Liu, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[116] Xinzeng Feng and Nicholas Zabaras, "Locally Weighted Projection Regression Method in High Dimensions", presented at the `Computational Methodologies for Uncertainty Quantification & Stochastic PDE-based Models for Predictive Simulations' symposium (Abani Patra, Omar Ghattas, Ernesto Prudencio, Onkar Sahni and Karl Schulz, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[115] Ilias Bilionis and Nicholas Zabaras, "Sparse Bayesian Kernel Techniques for the Solution of SPDEs", presented at the `Computational Methodologies for Uncertainty Quantification & Stochastic PDE-based Models for Predictive Simulations' symposium (Abani Patra, Omar Ghattas, Ernesto Prudencio, Onkar Sahni and Karl Schulz, organizers) at the 11th U.S. National Congress on Computational Mechanics, Minneapolis, MN, July 25-29, 2011 (Powerpoint Presentation).

[114] Nicholas Zabaras, Xiang Ma and Ilias Bilionis, "Kernel PCA for Stochastic Input Generation of Multiscale Systems", presented at the `Uncertainty Quantification in Multiscale Systems' symposium (H. Najb, B. Debusschere and O. Knio, organizers) at the 2011 SIAM-Computational Science and Engineering Meeting, Reno, Nevada, February 28 - March 2, 2011 (Powerpoint Presentation).

[113] Ilias Bilionis, Xinzeng Feng and Nicholas Zabaras, "Sparse Bayesian Kernel Techniques for the Solution of SPDEs", presented at the `Numerical Methods for Stochastic Computation and Uncertainty Quantification' symposium (Youssef M. Marzouk, organizer) at the 2011 SIAM-Computational Science and Engineering Meeting, Reno, NV, February 28-March 2, 2011 (Powerpoint Presentation).

[112] Nicholas Zabaras, "Are information sciences based approaches essential to allow predictive modeling of multiscale/multiphysics problems?", presented at the `Multiscale Materials Modeling' debate forum (G. Paulino, organizer) at NSF-CMMI, 2011 NSF Engineering Research and Innovation Conference, Atlanta, GA, January 4-7, 2011 (Powerpoint Presentation).

[111] Nicholas Zabaras and Bin Wen, "On the design of polycrystalline materials with an integration of multiscale modeling and statistical learning", presented at the NSF-CMMI, 2011 NSF Engineering Research and Innovation Conference, Atlanta, GA, January 4-7, 2011 (Powerpoint Presentation).

2010


[110] Nicholas Zabaras and Xiang Ma, "A stochastic heterogeneous multiscale method for porous media flows", presented at the `Numerical Methods for Stochastic Computation and Uncertainty Quantification' symposium (D. Xiu and Youssef M. Marzouk, organizers) at the 2010 SIAM Annual Meeting, Pittsburgh, PA, July 12-16, 2010 (Powerpoint Presentation).


2009


[109] Nicholas Zabaras and Xiang Ma, "An adaptive hierarchical sparse grid collocation algorithm for the solution of stochastic differential equations", presented at the `Uncertainty quantification in computational science and engineering ' symposium (R. Ghanem et al., organizers) at the 10th U.S. National Congress in Computational Mechanics, Columbus, OH, July 16-19, 2009 (Powerpoint Presentation).

[108] Bin Wen and Nicholas Zabaras, "Grain-size effect in 3D polycrystalline microstructure including texture evolution", presented at the `Modeling issues and computational methodologies of virtual polycrystals' symposium (P. Dawson et al., organizers) at the 10th U.S. National Congress in Computational Mechanics, Columbus, OH, July 16-19, 2009 (Powerpoint Presentation).

[107] Zheng Li and Nicholas Zabaras, "Low-dimensional models for microstructure representation: A data-driven approach", presented at the `Stochastic material models' symposium (Sharif Rahman et al., organizers) at the 10th U.S. National Congress in Computational Mechanics, Columbus, OH, July 16-19, 2009 (Powerpoint Presentation).

[106] Babak Kouchmeshky and Nicholas Zabaras, "Uncertainty quantification in multiscale deformation processes", presented at the `Stochastic material models' symposium (Sharif Rahman et al., organizers) at the 10th U.S. National Congress in Computational Mechanics, Columbus, OH, July 16-19, 2009 (Powerpoint Presentation).

[105] Xiang Ma and Nicholas Zabaras, "An efficient Bayesian inference approach to inverse problems based on adaptive sparse grid collocation method", presented at the `Inverse problems: Theory and applications' symposium (C. Earl et al., organizers) at the 10th U.S. National Congress in Computational Mechanics, Columbus, OH, July 16-19, 2009 (Powerpoint Presentation).

[104] Nicholas Zabaras and Xiang Ma, "A Dimension-reduction Method for Stochastic PDEs", presented at the `MS120 Numerical Methods for Stochastic Computation and Uncertainty Quantification' symposium (D. Xiu et al., organizers) at the 2009 SIAM Conference in Computational Sciences and Engineering (CSE09), March 2-6, 2009 Miami Hilton Hotel, Miami, Florida (Powerpoint Presentation).

[103] Nicholas Zabaras and Xiang Ma, "Bayesian Inference Using an Adaptive Sparse Grid Collocation Method", presented at the `MS138 Bayesian Formulations for System Identification, Modeling and Prediction' symposium (N. Zabaras and S. Koutsourelakis, organizers) at the 2009 SIAM Conference in Computational Sciences and Engineering (CSE09), March 2-6, 2009 Miami Hilton Hotel, Miami, Florida (Powerpoint Presentation).

[102] Nicholas Zabaras and Baskar Ganapathysubramanian, "Data driven reduced order models for the representation of polycrystalline microstructures", presented at the `Characterization of Minerals, Metals and Materials' symposium (Toru H. Okabe, Ann M. Hagni, Sergio Neves Monteiro, organizers) at the 2009 TMS Annual Meeting & Exhibition, San Francisco, CA, February 15-19. 2009 (Powerpoint Presentation).

[101] Baskar Ganapathysubramanian and Nicholas Zabaras, "Characterizing adsorption on metallic surfaces: effect of composition", presented at the `Computational Thermodynamics and Kinetics' symposium (Long Qing Chen, Yunzhi Wang, Pascal Bellon, Yongmei Jin, organizers) at the 2009 TMS Annual Meeting & Exhibition, San Francisco, CA, February 15-19. 2009 (Powerpoint Presentation).

[100] N. Zabaras and B. Kouchmeshky, "Modeling uncertainty propagation in deformation processes", presented at the `General Abstracts: Materials Processing and Manufacturing Division' symposium (Thomas R. Bieler, Neville R. Moody, organizers) at the 2009 TMS Annual Meeting & Exhibition, San Francisco, CA, February 15-19. 2009 (Powerpoint Presentation).

[99] B. Kouchmeshky and N. Zabaras, "Advances on multiscale design of deformation processes for the control of material properties", presented at the `Materials Processing Fundamentals' symposium (Prince N. Anyalebechi, organizer) at the 2009 TMS Annual Meeting & Exhibition, San Francisco, CA, February 15-19. 2009 (Powerpoint Presentation).

2008

[98] N. Zabaras and B. Ganapathysubramanian, "A Non-Linear Dimension Reduction Methodology for Generating Data-Driven Stochastic Input Models", presented at the `Algorithms and Analysis in Uncertainty Quantification' symposium in the 2008 SIAM Annual Meeting, (Xiaoliang Wan and G, Karniadakis, organizers), San Diego CA, July 7-11, 2008 (Powerpoint Presentation).

[97] N. Zabaras and X. Ma, "An Adaptive Hierarchical Sparse Grid Collocation Algorithm for the Solution of Stochastic Differential Equations", presented at the `Numerical Methods for Stochastic Computation and Uncertainty Quantification' symposium in the 2008 SIAM Annual Meeting, (R. Ghanem and D. Xiu, organizers), San Diego CA, July 7-11, 2008 (Powerpoint Presentation).

[96] B. Kouchmeshky and N. Zabaras, "A microstructure-sensitive design approach for controlling properties of HCP materials", presented at the `9th Global Innovations Symposium: Trends in Integrated Computational Materials Engineering for Materials Processing and Manufacturing' symposium in the 2008 TMS Annual Meeting & Exhibition, (C. C. Battaile, A. Misra, J.A. Hines. J. W. Sears, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

[95] Wei Li and N. Zabaras, "Finite element modeling of the deformation of 3D polycrystals including the effect of grain size distribution", presented at the `3-Dimensional Materials Science' symposium in the 2008 TMS Annual Meeting & Exhibition, (M. D. Uchic, E. M. Taleff, A. C. Lewis, J. P. Simmons, M. J. DeGraef, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

[94] B. Kouchmeshky and N. Zabaras, "A simple non-hardening rate-independent constitutive model for HCP polycrystals deforming by slip and twinning", presented at the `Deformation Twinning: Formation Mechanisms and Effects on Material Plasticity: Experiments and Modeling' in the 2008 TMS Annual Meeting & Exhibition, (G. T. Gray, S. Mahajan, E. K. Cerreta, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

[93] B. Ganapathysubramanian and N. Zabaras, "Multibody expansions: An ab initio based transferable potential for computational thermodynamics", presented at the `Computational thermodynamics and kinetics' symposium in the 2008 TMS Annual Meeting & Exhibition, (Y. Wang, L.-Q. Chen, J. J. Hoyt, Y. U. Wang, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

[92] B. Ganapathysubramanian and N. Zabaras, "Integrated thermo-magneto-hydrodynamic control of Bridgman growth of semiconductor single crystals", presented at the `9th Global Innovations Symposium: Trends in Integrated Computational Materials Engineering for Materials Processing and Manufacturing' in the 2008 TMS Annual Meeting & Exhibition, (C. C Battaile, A. Misra, J.A. Himes, J. W. Sears, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

[91] N. Zabaras and B. Ganapathysubramanian, "A data driven approach for generating reduced-order stochastic models of random heterogeneous media", presented at the `3-Dimensional Materials Science' symposium in the 2008 TMS Annual Meeting & Exhibition, (M. D. Uchic, E. M. Taleff, A. C. Lewis, J. P. Simmons, M. J. DeGraef, organizers), New Orleans, Louisiana, March 9-13, 2008 (Powerpoint Presentation).

2007

[90] X. Ma and N. Zabaras, "Modeling natural convection in random porous media", presented at the `Computational aspects of the Stochastic Finite Element Methods,' symposium in the 9th National Congress on Computational Mechanics, (Manolis Papadrakakis, Vissarion Papadopoulos and Dimos C. Charmpis, organizers), San Francisco, CA, July 22-26, 2007 (Powerpoint Presentation).

[89] L. Tan and N. Zabaras, "Multiscale modeling of alloy solidification", presented at the `Spatial and/or Temporal Multi-scale Computational Modeling of Materials,' symposium in the 9th National Congress on Computational Mechanics, (Somnath Ghosh and Peter Wriggers, organizers), San Francisco, CA, July 22-26, 2007 (Powerpoint Presentation).

[88] V. Sundararaghavan and N. Zabaras, "On the development of weighted many-body expansions using ab-initio calculations for predicting stable crystal structures", presented at the `Recent Developments in Nanoscale Simulations: From Quantum to Coarse-Grained Modeling,' symposium in the 9th National Congress on Computational Mechanics, (Shaofan Li, Ju Li and Sukky Jun, organizers), San Francisco, CA, July 22-26, 2007 (Powerpoint Presentation).

[87] N. Zabaras and S. Sankaran, "A sparse grid collocation scheme for stochastic inverse problems", presented at the `Uncertainty Modeling and Quantification in Computational Mechanics,' symposium in the 9th National Congress on Computational Mechanics, (R. Ghanem, J. Red-Horse, G. Schueller and C. Soize, organizers), San Francisco, CA, July 22-26, 2007 (Powerpoint Presentation).

[86] B. Ganapathysubramanian and N. Zabaras, "A nonlinear dimension reduction strategy for generating data driven stochastic input models", presented at the `Uncertainty Modeling and Quantification in Computational Mechanics,' symposium in the 9th National Congress on Computational Mechanics, (R. Ghanem, J. Red-Horse, G. Schueller and C. Soize, organizers), San Francisco, CA, July 22-26, 2007 (Powerpoint Presentation).

[85] V. Sundararaghavan and N. Zabaras, "Using multi-body energy expansions from ab-initio calculations for computation of alloy phase structures", presented at the `Computational Thermodynamics and Phase Transformations' symposium in the 2007 TMS Annual Meeting & Exhibition (C. Battaile and J. R. Morris organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[84] B. Ganapathysubramanian and N. Zabaras, "Controlling semiconductor growth using magnetic fields and rotation", presented at the `Materials Processing under the Influence of External Fields' symposium in the 2007 TMS Annual Meeting & Exhibition (Qingyou Han et al. organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[83] B. Ganapathysubramanian and N. Zabaras, "Topological characterization of adsorption phenomena using multi-body potential expansions", presented at the `Advances in Computational Materials Science and Engineering Methods' symposium in the 2007 TMS Annual Meeting & Exhibition (Koenraad Janssens; Veena Tikare; Richard LeSar, organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[82] N. Zabaras and S. Sankaran, "Computing property variability of polycrystals induced by grain size and orientation uncertainties", presented at the `Advances in Computational Materials Science and Engineering Methods' symposium in the 2007 TMS Annual Meeting & Exhibition (Koenraad Janssens; Veena Tikare; Richard LeSar, organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[81] N. Zabaras and L. Tan, "A level set simulation of dendritic solidification of multi-component alloys", presented at the `Advances in Computational Materials Science and Engineering Methods' symposium in the 2007 TMS Annual Meeting & Exhibition (Koenraad Janssens; Veena Tikare; Richard LeSar, organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[80] N. Zabaras and V. Sundararaghavan, "Control of properties in deformation processes using multi-scale sensitivity analysis", presented at the `Materials Processing and Manufacturing Division Symposium: Mechanics and Materials Modeling and Materials Design Methodologies, in the Honor of Dr. Craig Hartley's 40 years of Contributions to the Field of Mechanics and Materials Science Materials Science' symposium in the 2007 TMS Annual Meeting & Exhibition (Brent Adams and Hamid Garmestani, organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[79] V. Sundararaghavan and N. Zabaras, "On the design and control of properties in polycrystalline materials using process-texture-property maps", presented at the `Materials Processing and Manufacturing Division Symposium: Mechanics and Materials Modeling and Materials Design Methodologies, in the Honor of Dr. Craig Hartley's 40 years of Contributions to the Field of Mechanics and Materials Science Materials Science' symposium in the 2007 TMS Annual Meeting & Exhibition (Brent Adams and Hamid Garmestani, organizers), Orlando, FL, February 25 - March 1st, 2007 (Powerpoint Presentation).

[78] N. Zabaras and B. Ganapathysubramanian, "Modeling diffusion in random heterogeneous media: Data-driven microstructure models, stochastic collocation and the variational multiscale method", presented at the `Stochastic Galerkin and Stochastic Collocation for SPDEs' symposium (Raul Tempone and Fabio Nobile, organizers) in the SIAM - CSE07, SIAM Conference on Computational Science and Engineering, Costa Mesa, CA, February 19 - 23, 2007 (Powerpoint Presentation).


2006

[77] N. Zabaras and B. Ganapathysubramanian, "Sparse grid collocation schemes for stochastic convection problems", presented at the 2006 APS Division of Fluid Mechanics 59th Annual Meeting, Tampa, FL, November 19-21, 2006 (Powerpoint Presentation).

[76] L. Tan and N. Zabaras, "Multiscale computational modeling of alloy solidification", presented at the `Mathematical and computational aspects of multiscale and multiphysics ' symposium (D. Xiu et al., organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[75] S. Sankaran and N. Zabaras, "An information-learning approach for multiscale modeling of materials", presented at the `Advances and applications of multiscale modeling and analysis methods' symposium (K. Terada and S. Ghosh, organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[74] V. Sundararaghavan, S. Sankaran and N. Zabaras, "Design of microstructure-sensitive properties in elasto-viscoplastic polycrystals using multi-scale homogenization techniques", presented at the `Multiscale computational design of products and materials' symposium (W. Chen et al., organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[73] B. Ganapathysubramanian and N. Zabaras, "The Stefan problem: A stochastic analysis using the extended finite element method", presented at the `Enriched finite element methods for evolving discontinuiities and interfaces (sanctioned by the IUTAM through the cooperative agreement between UACM and IUTAM)' symposium (N. Moes and J. Dolbow organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[72] J. Wang and N. Zabaras, "Permeability estimation using a hierarchical Markov tree (HMT) model", presented at the `Data assimilation in computational mechanics' symposium (R. Ghanem, organizer) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[71] B. Ganapathysubramanian and N. Zabaras, "Tailored magnetic fields for controlled semiconductor growth", presented at the `Computational electro-magneto-fluid-dynamics' symposium (G. Dulikravich et al., organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[70] S. Sankaran and N. Zabaras, "Maximum entropy approach for statistical modeling of three-dimensional polycrystal microstructures", presented at the `Mathematical and computational aspects of multi-scale and multi-physics' symposium (Dongbin Xiu et al., organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[69] L.Tan and N. Zabaras, "Modeling of microstructure evolution in multicomponent alloys using the level set method with adaptive mesh refinement", presented at the `Computational advances in evolving curves and interfaces' symposium (K. Mikula and P. Frolkovic, organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[68] N. Zabaras and B. Asokan, "A stochastic variational multiscale method for diffusion in heterogeneous random media", inivited keynote lecture presented at the `Uncertainty modeling and quantification in computational mechanics' symposium (R. Ghanem et al., organizers) in the Seventh World Congress on Computational Mechanics, Century Plaza Hotel & Spa Los Angeles, California, USA, July 16-22, 2006 (Powerpoint Presentation).

[67] V. Sundararaghavan and N. Zabaras, "Combined MD and continuum approaches towards modeling inter-granular failure using cohesive zone models", presented at the `Deformation and Fracture from Nano to Macro: A Symposium Honoring W.W. Gerberich's 70th Birthday' symposium in the 2006 TMS Annual Meeting & Exhibition (D. F. Bahr, J. Lucas and N. R. Moody, organizers), San Antonio, TX, March 12-16, 2006 (Powerpoint Presentation).

[66] V. Sundararaghavan and N. Zabaras, "On the control of microstructural degrees of freedom in deformation processes", presented at the `Processing and Mechanical Response of Engineering Materials' symposium in the 2006 TMS Annual Meeting & Exhibition (T. R. Bieler et al., organizers), San Antonio, TX, March 12-16, 2006 (Powerpoint Presentation).

[65] N. Zabaras, V. Sundararaghavan and S. Sankaran, "An information-theoretic approach for obtaining property PDFs from macro-specifications of microstructural variability", presented at the `3-Dimensional Materials Science' symposium in the 2006 TMS Annual Meeting & Exhibition (J. P. Simmons, M. D. Uchic, D. J. Jensen, D. N. Seidman, organizers), San Antonio, TX, March 12-16, 2006 (Powerpoint Presentation, Publication at TMS-Letters).


2005

[64] V. Sundararaghavan and N. Zabaras, "Statistical learning methods applied to multi-scale microstructure", presented at the `16th ACBM/NIST Computer Modeling Workshop' (Edward Garboczi, organizer), National Institute of Standards and Technology, Gaithersburg, Maryland, June 27 - 30, 2005 (Powerpoint Presentation).

[63] M. Thompson, V. Sundararaghavan and N. Zabaras, "Evaluation of material strength in inelastic heterogeneous microstructures: A toolbox for virtual experimentation ", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Multi-scale Modeling of Material Behavior - Solids' (R. Radovitzky and A. Cuitino, organizers), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[62] S. Acharjee and N. Zabaras, "On the analysis of finite deformations and continuum damage in materials with random properties", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Computational Stochastic Mechanics' (G. I. Schuëller, organizer), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[61] L. Tan and N. Zabaras, "Level set method for simulating multi-phase multi-component dendritic solidification", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Multiscale, Multiphysics Computational Fluid Dynamics' (Y. Zhang and J. Glimm, organizers), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[60] B. Ganapathysubramanian, V. Sundararaghavan and N. Zabaras, "Molecular dynamics approach for investigation of grain boundary response with applications to continuum simulation of failure in nano-crystalline materials", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Molecular Methods in Mechanics' (N. G. Hadjiconstantinou, organizer), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[59] L. Tan, D. Samanta and N. Zabaras, " A coupled thermomechanical, thermal transport and segregation analysis of the solidification of aluminum alloys on molds of uneven surface topographies", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Multiphysics Coupling in Materials Processing' (F. Bay and J.-L. Chenot organizers), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[58] D. Samanta and N. Zabaras, "Freckle suppression in directional solidification of binary and multicomponent alloys using magnetic fields", Proceedings of the 3nd M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Multiphysics Coupling in Materials Processing' (F. Bay and J.-L. Chenot organizers), Massachusetts Institute of Technology, Cambridge, MA, June 14 - 17, 2005 (Powerpoint Presentation).

[57] S. Sankaran and N. Zabaras, "An information-theoretic tool for property prediction of random microstructures", presented in the symposium `Mathematical and Computational Foundations of Multiscale Modeling' (J-S Chen et al., organizers), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[56] B. Velamur Asokan and N. Zabaras, "Stochastic variational multiscale method for stochastic elliptic equations with multiscale coefficients", presented in the symposium `Stabilized and multiscale finite element methods' (A. Masud and T.J.R. Hughes, organizers), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[55] S. Acharjee and N. Zabaras, "Modeling uncertainty propagation in large deformations", presented in the symposium `Complex Models in Solid and Fluid Mechanics : Methods and Applications in Multi-physical and Multi-scaling Problems' (Geiser Juergen, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[54] S. Acharjee and N. Zabaras, "Reduced-order modeling of stochastic transport processes", presented in the symposium `Coupled Nonlinear Flow and Transport Phenomena' (Carey Graham, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[53] B. Ganapathysubramanian, D. Samanta and N. Zabaras, "On the control of convection in the solidification of alloys using tailored magnetic fields", presented in the symposium `Coupled Nonlinear Flow and Transport Phenomena' (Carey Graham, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[52] B. Ganapathysubramanian, L. Tan and N. Zabaras, "Modeling dendritic solidification with fluid flow using X-FEM and level set techniques", presented in the symposium `Recent Advances in Enriched Finite Element Technology ' (Jack Chessa, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[51] N. Zabaras and B. Velamur Asokan, "A stochastic variational multiscale method with explicit subgrid modeling for advection-diffusion systems", presented in the symposium `Uncertainties, Verification and Validation, Symposium in honor of Prof. Ivo Babuska' (Roger Ghanem, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[50] N. Zabaras and L. Tan, "An energy conserving level set simulation of dendritic solidification including the effects of melt convection", presented in the symposium `Advances in Flow Simulation and Modeling: I) Fundamental and Enabling Technologies, II) Moving Boundaries and Interfaces ' (Tayfun Tezduyar, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[49] S. Sankaran and N. Zabaras, "Information theoretic wavelet-based approach to multilength scale modeling of materials", presented in the symposium `Multiple Scale Analysis and Its Applications to Nanoscale Mechanics and Materials' (Wing Kam Liu, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[48] N. Zabaras, "Inverse problems: From functional optimization techniques to Bayesian computation", presented in the symposium `Advances in Computational Mechanics and Optimization: Symposium in honor of Prof. Subrata Mukherjee's 60th birthday' (F. Bobaru, organizer), in the proceedings of the 8th US National Congress in Computational Mechanics, The University of Texas at Austin, Austin, TX, July 24-28, 2005 (Powerpoint presentation).

[47] V. Sundararaghavan and N. Zabaras, "A data mining approach for the design of polycrystalline materials", presented in the symposium `Computational Aspects of Mechanical Properties of Materials: Meso-Scale and Continuum Modeling' (Kwai S. Chan and Diana Farkas, organizers), in the proceedings of EPD Congress 2005, TMS (The Minerals, Metals & Materials Society), 2005 TMS Annual Meeting & Exhibition, San Francisco, CA, February 13-17, 2005 (Powerpoint presentation).


2004

[46] S. Ganapathysubramanian and N. Zabaras, "On the synergy between classification of textures and process sequence selection", presented in the symposium `Materials by Design: Atoms to Applications' (K. Rajan and K. Sankaran, organizers), in the proceedings of EPD Congress 2004 (Edited by M.E. Schlesinger), TMS (The Minerals, Metals & Materials Society), 2004 TMS Annual Meeting & Exhibition, Charlotte, North Carolina, March 14-18, 2004 (Powerpoint presentation).


2003

[45] Swagato Acharjee, Shankar Ganapathysubramanian and Nicholas Zabaras, "A proper orthogonal decomposition approach to microstructure model reduction in Rodrigues space with applications to the control of material properties", Proceedings of the Second M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Multiscale Materials Modeling and Simulation', Massachusetts Institute of Technology Cambridge, MA, June 17-20, 2003 (powerpoint presentation).

[44] N. Zabaras and D. Samanta, "A stabilized finite element method for flow in porous media and binary alloy solidification systems", Proceedings of the Seventh U.S. National Congress on Computational Mechanics (edts. Thomas Bickel et al.), presented at the Symposium on `Stabilized and Multilength scale methods', Seventh U.S. National Congress in Computational Mechanics, Albuquerque, New Mexico, July 27--31, 2003 (Powerpoint Presentation).

[43] N. Zabaras and B. Velamur Asokan, "Robust control of continuum systems: A spectral approach", Proceedings of the Second M.I.T. Conference on Computational Fluid and Solid Mechanics, presented at the Symposium on `Innovative Methods in Optimal Design and Control', Massachusetts Institute of Technology Cambridge, MA, June 17-20, 2003 (Powerpoint Presentation).

[42] N. Zabaras and B. Velamur Asokan, "Uncertainty quantification in analysis and design of stochastic continuum systems", Proceedings of the Seventh U.S. National Congress on Computational Mechanics (edts. Thomas Bickel et al.), presented at the Symposium on `Uncertainty Quantification', Seventh U.S. National Congress in Computational Mechanics, Albuquerque, New Mexico, July 27--31, 2003 (Powerpoint Presentation).

[41] S. Ganapathysubramanian and N. Zabaras, "Polycrystals and Computational Design: Is the control of microstructure sensitive properties feasible?", Proceedings of the Seventh U.S. National Congress on Computational Mechanics (edts. Thomas Bickel et al.), presented at the Symposium on `Computational Issues in the Representation and Evalutation of Structure and Properties in the Plastic Response of Polycrystalline Materials', Seventh U.S. National Congress in Computational Mechanics, Albuquerque, New Mexico, July 27--31, 2003 (Powerpoint Presentation).


2002

[40] S. Ganapathysubramanian and N. Zabaras, "A continuum sensitivity method for the design of deformation processes of materials with ductile damage", in the Proceedings of the 39 Annual Technical Meeting of the Society of Engineering Science, State College, PA, October 13-16, 2002 (powerpoint presentation).

[39] N. Zabaras and S. Ganapathysubramanian, "Computational design of multi-stage deformation processes", to appear in the Proceedings of the 39 Annual Technical Meeting of the Society of Engineering Science, State College, PA, October 13-16, 2002 (powerpoint presentation).

[38] N. Zabaras and Lei Wan, "A stabilized equal-order velocity-pressure formulation for the analysis of melt flow in binary alloy solidification", to appear in the Proceedings of the WCCM V, Fifth World Congress on Computational Mechanics, July 7-12, 2002, Vienna, Austria.

[37] N. Zabaras and S. Ganapathysubramanian, "A continuum sensitivity analysis for shape optimization in the deformation processing of porous materials", to appear in the Proceedings of the WCCM V, Fifth World Congress on Computational Mechanics, July 7-12, 2002, Vienna, Austria.

[36] N. Zabaras, "Computational design methods for an accelerated insertion of materials", Proceedings of the 2nd Symposium on Computational Modeling of Multi-Scale Phenomena, August 5--9, 2002, Laboratório Nacional de Computação Científica (LNCC) Petrópolis, BRAZIL.


2001

[35] N. Zabaras, A. Srikanth, Q. Li and Z. Hu, "Towards the development of a robust computational design simulator for metal forming processes", Proceedings of the Sixth U.S. National Congress on Computational Mechanics (edts. G. M. Hulbert et al.), presented at the Symposium on "Materials Processing" at Dearborn, Michigan, August 1--3, 2001 (powerpoint presentation).

[34] S. Ganapathysubramanian and N. Zabaras, "A continuum sensitivity analysis for the design of hot metal forming processes", Proceedings of the Sixth U.S. National Congress on Computational Mechanics (edts. G. M. Hulbert et al.), presented at the Symposium on "Design Optimization Applications in Industry" at Dearborn, Michigan, August 1--3, 2001 (powerpoint presentation).

[33] R. Sampath and N. Zabaras, "Inverse design of complex continuum transport processes", Proceedings of the Sixth U.S. National Congress on Computational Mechanics (edts. G. M. Hulbert et al.), presented at the Symposium on "Inverse Problems in Mechanics" at Dearborn, Michigan, August 1--3, 2001.

[32] N. Zabaras, "Computational Techniques for the design of solidification processes", invited presentation in the `American Foundry Society Symposium on Using Computer Applications in the Foundry', Marriott Key Center, Cleveland, Ohio, June 25--27, 2001.

[31] N. Zabaras, "On the development of a computational design finite element algorithms for bulk forming processes", presented in the Electronic Prototyping Review '01 (organizer Dr. Steve LeClair, AFRL/MLMR), symposium held at the Boeing Company Bellevue, WA, July 25 -- 26, 2001 (powerpoint presentation).


2000

[30] N. Zabaras and R. Sampath, "A stabilized finite element method for the analysis of combined thermocapillary and buoyancy-driven convective flows", presented in Finite Elements in Flow Problems 2000, pp. 109, 2000 (conference held at the University of Texas at Austin, Austin, TX, April 30 -- May 4, 2000).


1999

[29] N. Zabaras, "Advanced computational techniques for the design and control of complex continuum systems", presented in the Electronic Prototyping Review '99, Air Force Institute of Technology, (organizer Dr. Neil Glassman, AFOSR, symposium held at Wright Patterson Air Force Base, Dayton, Ohio, July 6 -- 8, 1999).

[28] N. Zabaras, "Advanced design techniques for forming and solidification processes", in the proceedings of AeroMat'99, 10th Annual Advanced Aerospace Materials and Processes Conference and Exposition, Symposium on the Optimization Based Design of Material Processes, pp. 81, 1999 (organizers J.C. Malas and G. Frazier, WPAB, conference held at Dayton Convention Center, Dayton, Ohio, June 21 -- 24, 1999).

[27] N. Zabaras, A. Sampath and Y. Bao, "A Lagrangian sensitivity analysis for finite inelastic deformations and metal forming processes", presented in the Fifth U. S. National Congress On Computational Mechanics, 1999 (held at Boulder, CO, August 4--6, 1999).

[26] R. Sampath and N. Zabaras, "Adjoint methods for the inverse design of complex natural convection systems", presented in the Fifth U. S. National Congress On Computational Mechanics, 1999 (held at Boulder, CO, August 4--6, 1999).


1997

[25] N. Zabaras, "Computational Mechanics Using An Object Oriented Environment", Proceedings of the Fourth U.S. National Congress on Computational Mechanics (edt. M. S. Shepard), pp. 207, San Francisco, CA, August 6--8, 1997.

[24] N. Zabaras and G. Z. Yang, "Inverse Algorithms for Directional Solidification Process Design", Proceedings of the Fourth U.S. National Congress on Computational Mechanics (edt. M. S. Shepard), pp. 274, San Francisco, CA, August 6--8, 1997.


1996

[23] N. Zabaras and S. Badrinarayanan, "Die and preform design in metal forming processes", in the proceedings of Advanced Materials: Development, Characterization and Mechanical Behavior (edt. T. Nicholas), MD-Vol. 74, pp. 121-122, 1996 (ASME Winter Annual Meeting, 1996).

[22] N. Zabaras and S. Badrinarayanan, "Inverse and Design Forming Problems", Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, pp. 455-456, University of New Mexico, Albuquerque, NM, Jan. 2--5, 1996.


1995

[21] N. Zabaras, "A variational approach to sensitivity analysis for non-linear problems in mechanics", extended abstract (edt. J. N. Reddy) pp. 77, Third US National Congress on Computational Mechanics, June 12--14, Dallas, Texas, 1995.

[20] N. Zabaras and S. Badrinarayanan, "Preform and die design problems in metal forming", Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference, pp. 511--512, presented at the University of California, San Diego, La Jolla, CA, January 4--6, 1995.


1994

[19] N. Zabaras and S. Badrinarayanan, "On inverse design forming problems", Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference, presented at MIT, Boston, MA, January, 1994.


1993

[17] N. Zabaras, "The inverse problem for finite element determination of mechanical and thermal parameters", presented at the Second USA-France Workshop on Deformation Processing of Metals (organized by J.-L. Chenot and M. Bellet), 1993 (conference organized at Sophia-Antipolis, France, September 27-29, 1993). [18] N. Zabaras, "Applications of inverse techniques to optimum design of solidification processes", NSF Design and Manufacturing Grantees Conference, Atlanta, GA, Jaunuary 1993.

[16] N. Zabaras, "Parameter estimation and ill-posed inverse problems for constitutive modeling", presented at the Symposium on Parameter Estimation and Modern Constitutive Equations (organized by S. Brown, et al.), 1993 (Winter Annual Meeting of ASME, held in New Orleans, LA, November 28-December 3, 1993).

[15] N. Zabaras, "A FEM analysis of deformations and stresses in growing bodies", presented in the Second U. S. Congress On Computational Mechanics, pp. 281, 1993 (conference held in Washington, D.C, August 16-18, 1993).

[14] N. Zabaras, "The inverse Stefan design problem", presented in Moving Boundaries 93: Computational Modeling of Free and Moving Boundary Problems (organized by L. C. Wrobel and C. A. Brebbia), 1993 (Second International Conference on Free and Moving Boundaries, held in Milan, Italy, June 23-25, 1993).


1992

[13] N. Zabaras, "Inverse, design and control solidification problems", presented in the USA--RUSSIA--FRANCE Symposium on Inverse Problems in Heat Transfer, 1992 (conference held at Michigan State University, East Lansing, Michigan, June 11-12, 1992).

[12] N. Zabaras and S. Kang, "On the solution of an ill-posed inverse design solidification problem using minimization techniques in finite and infinite dimensional spaces", presented in the Fifth Annual Inverse Problems in Engineering Seminar, 1992 (conference held at Michigan State University, East Lansing, Michigan, June 11-12, 1992).


1991

[11] D. Schnur and N. Zabaras, "Parameter estimation problems in elastostatics", presented in the Fourth Annual Inverse Problems in Engineering Seminar, 1991 (conference held at Michigan State University, East Lansing, Michigan, June 10-11, 1991).

[10] N. Zabaras, "Inverse and design problems in manufacturing", presented in the Fourth Annual Inverse Problems in Engineering Seminar, 1991 (conference held at Michigan State University, East Lansing, Michigan, June 10-11, 1991).

[9] D. Schnur and N. Zabaras, "A finite element method for determining elastic material properties and internal structure from measured surface displacements and applied boundary tractions", presented in the First U. S. National Congress On Computational Mechanics, 1991 (conference held at Chicago, IL, July 21-24, 1991).


 
1990

[8] N. Zabaras, "Finite element analysis of an inverse Stefan design problem", Proceedings of the International Conference on Identification in Dynamic Systems and Inverse Problems, pp. 193 (conference held at Suzdal, USSR, September 10-14, 1990).

[7] N. Zabaras, "Inverse analysis and design of two-dimensional Stefan processes", presented in the Third Annual Inverse Problems in Engineering Seminar, 1990 (conference held at Michigan State University, East Lansing, Michigan, June 25-26, 1990).

[6] N. Zabaras, "On modeling of deformation and residual stresses in solidifying bodies", presented in the 11th U. S. National Congress of Applied Mechanics, 1990 (conference held at the University of Arizona, Tucson, May 21-25, 1990).  


 
1989

[5] N. Zabaras, "Inverse solidification problems", presented in the Second Annual Inverse Problems in Engineering Seminar, 1989 (conference held at Michigan State University, East Lansing, Michigan, June 12-13, 1989).


[4] N. Zabaras and D. Schnur, "A finite element method for solving two-dimensional inverse elastic and elasto-viscoplastic problems using spatial regularization", presented in the Second Annual Inverse Problems in Engineering Seminar, 1989 (conference held at Michigan State University, East Lansing, Michigan, June 12-13, 1989).


 
1988

[3] N. Zabaras and A. Maniatty, "A finite element method analysis of some inverse deformation problems", presented in the First Annual Inverse Problems in Engineering Seminar, 1988 (conference held at Michigan State University, East Lansing, Michigan, June 12-13, 1988).


[2] N. Zabaras, "A deforming finite element method analysis of inverse heat transfer problems with a phase change", presented in the First Annual Inverse Problems in Engineering Seminar, 1988 (conference held at Michigan State University, East Lansing, Michigan, June 12-13, 1988).


 1986

[1] N. Zabaras and S. Mukherjee, "Solidification problems by boundary elements", presented at the First World Congress On Computational Mechanics, 1986 (conference held at the University of Texas at Austin, September 22-26, 1986).